PDMS Training

AVEVA PDMS course will cover the fundamental principles and concepts used in plant design management system
4.5 (1788 ratings)
2813 students enrolled
Self Paced Learning

180 Days unlimited access to self paced learning

Online Classroom Flexi-Pass

Pay once and get unlimited access for 90 days

[si-contact-form form=’13’]

PDMS Training 2813 students enrolled

4.5 (1788 ratings)
Talk to Course Counselor – +91 – 9840287919

PDMS Training

Key Features

  • 3+ Practice project
  • 70 Hours of instructor led training
  • 600+ Interview questions & tips
  • 15+ Years experienced industry expert trainers
  • 20+ Sub topic
  • Industry expert mentoring support

About PDMS Training

The objective of AVEVA PDMS course is to provide the delegates the in-depth knowledge and skills in this discipline to facilitate faster learning curves while on the job. A PDMS (Plant Design Management System) piping designer uses 3D modelling software package for engineering, design and construction projects in onshore and offshore projects. AVEVA PDMS course will cover the fundamental principles and concepts used in plant design management system. Upon completion of AVEVA PDMS course the delegates will have a clear understanding of the design and engineering principles used in plant design management system (PDMS).

Eligibility : Diploma / B.Tech in Engineering Placement Opportunity : YES

S.No. Course Name Mode Duration Project (live)
1 AVEVA PDMS Training Full time 45 days Yes
2 AVEVA PDMS Training Online 45 days Yes
3 AVEVA PDMS Training Weekends 60 days Yes

PDMS Training Curriculum

70 Hours + 180 Days
10 Section
History of PDMS1.30
What does PDMS offer1.00
Modules of PDMS1.15
PDMS data base1.45
Design database hierarchy1.30
Introduction of admin2.15
To create of new project1.45
To replicate a project1.30
Introduction of equipment modeling and login1.15
Hierarchy of equipment modeling0.35
Create user defined shapes1.00
Creation of standard equipment0.40
Creation of non standard equipment0.20
Modify standard equipments0.50
Replaces standard equipment1.10
Creation of design equipment, primitives, cutout primitives, connect primitives.0.25
Origin of equipment, Position of equipment0.30
Nozzle placing, Orientate copy of nozzles0.30
Modify coordination position and relatively position.1.00
Model editor, Setting tools on equipment modeling0.30
What is a pipe and what is a branch?1.00
Create piping system, Hierarchy of pipe work0.35
How to start routing a pipe1.00
Creation of pipe components0.40
Different between distance / spool option0.20
How to reselect a components0.50
How to choose an out of specification item?1.10
Common attributes of piping components.0.25
Special attributes which make a difference0.30
Branch attributes, How to work backward and forward?0.30
How to reverse the flow direction?1.00
Pipe creation by specifying explicit position0.30
Slop pipeData consistency check, Arrive / leave change0.30
Beam & column1.30
Panels & plates0.55
Walls & floors1.00
ASL modeler2.05
Introduction of hangers & supports0.55
Hierarchy of hangers & supports1.15
How to create modeling of hangers & supports1.15
Modify of hangers & supports1.35
Position connect utilities1.00
Setting of hangers & supports0.25
Creation of cable tray main0.55
Creation of components1.25
Common attributes of cable tray components1.05
Cable tray branch attributes1.35
How to work backward and forward?2.00
Introduction of isodraft1.20
Types of isometrics1.30
The isometric output format1.40
The isometric detailing commands1.30
Material list1.30
What does draft do?0.55
The data base hierarchy1.00
Department / registry1.15
Hidden line representation0.35
Graphical representation0.20
Different types of view creation0.25
Draft dimensioning, Linear dimensions0.45
Angular dimensions, Radial dimensions0.30
Pitch circle dimensions, Draft labeling0.30
Symbolic label, Crating sections1.05
How to create report1.20
How to modify report1.00
How to run report0.40
How to delete report1.00
PDMS commands1.30
Equipment, piping, structural & drafting1.00

Become a PDMS Designer Expert

Improve your designing knowledge and skills taught by our industry experts. You can get a world class training and best practical session from oilandgasclub in both online and direct mode. Enroll today.

Instructor Biography

Mr. R.Raj

He has 15 plus years of various experience of working. Foster wheeler Singapore, PETRONAS Malaysia, corporation of Malaysia (Water Plant). Hands on experience on software such as AutoCAD, Microstation Aveva PDMS, Navisworks, MS-Office, Nozzle Pro etc. Hand on experience in FPSO Topside module and process piping installation work.


  • Learn from industry experts
  • Comprehensive practical training
  • Learn A-Z practical sessions
  • Interactive doubt sessions
  • Industry case – studies 
  • Live classes with instructors
  • Oil and gas sector
  • EPC sector
  • Energy and power sector
  • Environmental waste disposal
  • Water treatment facilities
  • Food and beverage
  • Energy consultancy
  • Fertilizer plant
  • Chemical & petrochemical plant
  • Infrastructure sector
  • You can upgrade your skills through certain events conducted by us.
  • 100 % focused on the industry based program.
  • Designed for both fresh engineers and working professionals to attain growth in oil and energy industry.
  • Get access to industry experts for technical advice and more.
  • Guided by the industry’s renowned professional with unprecedented knowledge of the oil and energy industry.
  • Getting trouble shooting support during work time.
  • Providing all training material and technical drawing, documents and case study materials.
  • You can visit any time our technical support club on ad hoc basis in some case this is chargeable.
  • You can attend technical discussion forums free of cost.
  • Interactive, interesting and motivational training sessions.
  • Free updates on technical increments as newsletter in oil and gas sector.
  • Attend industry events, organized by us and our partners.
  • Expert and experienced faculty from the industry. (5-10 Year Exp.)

Internet speed: preferable 512 KBPS

Online access

The courses are internet-based and can be accessed directly from your desk. Some courses are enriched with audio so you will also need an enable sound-card and a headset or speakers, in order to fully benefit from the course. For full technical skills requirements.

Time spend

Please allow an average of 3 to 5 hours of online learning in total or weekend full-time. This can be broken down into shorter segments, at your own convenience. Your log-in will be valid for approximately 110 days, during which time you may access the online course as many times as you wish.

Delegate can work through each of our online module at their own pace and at times convenient for them, in order to enhance their technical skills, there is no test or exam at the end of course, but the interactive exercises and self analysis tests allow you to monitor your own progress as you work through the content.

  • Experienced professionals who are working in other engineering industry and wish to pursue a career in petrochemical, oil and gas industries.
  • Job seekers who like to work in oil and gas industries.
  • Freelancers who wish to expand their skills and expand their of service oil and gas industries.
  • Teaching professionals who work in educational service and wish to change their career towards oil and gas industries.

All these training are live interactive sessions wherein you can raise concerns and discussion at any point during the class.

Aspirants wish to become either planner in project planning field or shutdown planner/scheduler with or without knowledge about industries like petrochemical industry, refineries, thermal plants, oil and gas, power, nuclear-plants etc.

Mr. R.Thangaraj is a graduated B. Tech production engineering from Anna University MIT campus Chennai. Having 15 plus years experience in senior piping design engineer (Engineering organizations of international repute) in various oil & gas / petrochemical / refinery / offshore / water treatment plant design etc.

He has 15+ years of varied experience of working.

  • Foster wheeler Singapore, PETRONAS Malaysia, corporation of Malaysia (Water Plant).
  • Hands on experience on software such as AutoCAD, Microstation Aveva PDMS, CAESAR II, Navisworks, MS-Office, Nozzle Pro etc.
  • Hand on experience in FPSO topside module and process piping installation work.
  • Checking and preparation of isometric drawings against master P&ID considering the integrity of the design base on project requirement, material specification, good design philosophy and practice.
  • Preparation of bulk material take off (MTO) from P&ID’s and equipment layouts. Preparation of conceptual piping layout using AutoCAD.
  • Piping field weld and shop weld by using software tools PDMS.
  • Interference checking of piping with other equipments, structures & piping.
  • Pipe routing, equipment & structural modeling using PDMS & microstation.
  • Extraction of piping layouts & isometrics using draft & iso-draft modules respectively.
  • Reviewing equipment vendor GADs and finalizing nozzle orientations as per feasibility.
  • Familiar with international design codes & standards.
  • Involved In internal and external client review and updating of comments.
  • Scheduling of outputs as per client schedule and preparing weekly progress report.
  • Proficient in piping drawing preparations and checking of fabrication drawings.
  • Experienced in checking of piping, fabrication, structural drawing & isometrics etc.
  • Preparing spec, catalogue creation in AutoCAD, solidwork.
  • Piping isometric, piping installation sequence, hydrotest/flushing method, piping reinstatement process, piping preservation, piping welding WPS, PQR, etc

Yes, you can cancel your enrollment at any time as long as reasonable advance is given to oil and gas club. We provide a complete refund after deduction the administration fee. To more, please go through our refund policy.

  • You can attend class anytime, anywhere you have web access
  • You will enhance your ability to communicate effectively through the latest technology with our quality trainer
  • Time expenses and effort for travel could be saved
  • Flexibility in choosing learning timing
  • The most up-to date technical topic at much lower total cost
  • More comfortable learning environment
  • Rookie of the field can earn as $21,000 to $26,000 (In India its around Rs.18000 to Rs. 25,000)
  • The experienced piping engineer can earn as $60,000 to $76,000 (In India its vary from Rs.70,000 from 90,000)


Average Rating





  • Pallavi
  • posted 7 Hours ago

The edcation I got from oilandgasclub.com helped me work with industry process and know what I’m talking about

  • Maunish
  • posted 21 Hours ago

I am experienced guy! But worry about the promotion always thinking what I need else extra to get promotion but at the correct time when I searched for this course to any organization then I find oilandgasclub.com in which they explain how to resisting all applied loads without failure during its intended life and provide all details with deep technical knowledge and now I am placed in MNC company after completing this course with 40% hike of previously salary………..thanks!

Free WordPress Themes - Download High-quality Templates