Home / Tag Archives: SP3D course in Chennai Mumbai Noida Hyderabad

Tag Archives: SP3D course in Chennai Mumbai Noida Hyderabad

Dynamic Simulation in Chemical Engineering

Dynamic-Simulation-in-Chemical-Engineering

Dynamic simulation is an extension of steady-state process simulation whereby time-dependence is built into the models via derivative terms i.e. accumulation of mass and energy. The advent of dynamic simulation means that the time-dependent description and control of real processes in real or simulated time are possible. This includes the description of starting up and shutting down a plant, changes ... Read More »

ASTM / American Society for Testing and Materials

ASTM-American-Society-for-Testing-and-Materials

There are numerous American Society for Testing and Materials designations cover the specification of wrought materials, forgings and castings used for plate, fittings, pipe and valves.The ASTM standards are directed to dimensional standards, materials and strength considerations. Some of the more material standards referenced are: A 36 Specification for Structural Steel A 53 Specification for Pipe, Steel, Black and Hot ... Read More »

EFW Pipe vs ERW Pipe

EFW-Pipe-vs-ERW-Pipe

EFW Pipe vs ERW Pipe:- EFW Pipe Manufacturing Processing of Electric Fusion Welding, also called Continuous Welding begins as coiled steel with appropriate thickness, width and weight is made. To form a continuous ribbon of steel several coils are welded together. Then the steel ribbon is heated to the necessary temperature and formed into an oval. In the next step ... Read More »

ASME B16 Piping Component Standards

ASME-B16-Piping-Component-Standards

Piping component standard developed by the American Society of Mechanical Engineers or the American National Standards Institute (ANSI) B16.1 Cast Iron Pipe Flanges and Flanged Fittings B16.3 Malleable Iron Threaded Fittings, Class 150 and 300 B16.4 Cast Iron Threaded Fittings, Classes 125 and 250 B16.5 Pipe Flanges and Flanged Fittings B16.9 Factory Made Wrought Steel Buttwelding Fittings B16.10 Face to ... Read More »

Conversion of Units

Conversion-of-units

Conversion Factor: 1 Meter = 3.28 Feet 1 Meter = 39.37 Inches 1 Meter = 100 Centimeters 1 Meter = 1000 Millimeters 1 Foot = 12 Inches 1 Inch = 2.54 Centimeters 1 Centimeter = 10 Millimeters S.no English – Fraction (Inch) English Decimal (Inch) English (Millimeter) 1. 1/16 0.0625 1.6 2. 1/8 0.125 3.2 3. 1/4 0.25 6.4 4. ... Read More »

Piping Engineers Must Be Check

Area-and-Volume

AREA Definition: A surface covered by specific shape is called area of that shape. i.e. area of square, circle etc. 1. Square: Area of Square = L x L = L2 Where L = L Length of side So if L = 5 cm Then Area = 5 x 5 = 25 cm2 2. Rectangle: Area of Rectangle = L ... Read More »

Abbreviations for Piping Drawings

Abbreviations for Piping Drawings

General S.No Abbreviation Description 1 BOP Bottom of Pipe 2 CL Center Line 3 EL Elevation 4 GR Grade 5 HC Hose Connection 6 ID Inside Diameter 7 MAT’L Materials 8 MTO Materials Take Off 9 REV Revision 10 OD Outside Diameter 11 SPEC Specification 12 STD Standard 13 BW Butt Weld 14 CONC Concentric 15 ECC Eccentric Related Courses ... Read More »

About the CAESAR II Documentation

Caesar-II-Documentation

To address the sheer volume of information available on CAESAR II and present it in a concise and useful manner to the analyst the program documentation is presented in three separate manuals: The User Guide describes the basic operation and flow of the many routines found in CAESAR II. This document provides necessary installation information, gives an overview of the ... Read More »

Advantages & Disadvantages of Material

advantages & disadvantages of material

Material Advantages Disadvantages Limitations Carbon Steel Lowest Capex Cheapest option Opex Involves inspection pigging Internal corrosion control through inhibition Corrosion rates are high Possibility of intelligent or coating Additional Opex through inhibition High corrosion (pigging) and external painting Carbon Steel with FBE Capex slightly more Low Opex Internal corrosion protection through lining Susceptible for corrosion if FBE coating is damaged ... Read More »

Functions of Valves

Functions of Valves

The design of the valves are done in such a way as to perform any of the above functions. The type of valves used can be classified in the following categories.1.0 Isolation Gate valves Ball valves Plug valves Piston valves Diaphragm valves Butterfly valves Pinch valves Related Courses in Engineering Design CAD Training 3+ Live Project Time Flexibility Expert Mentors ... Read More »

Free WordPress Themes - Download High-quality Templates