Home / Tag Archives: Piping Design

Tag Archives: Piping Design

Dynamic Simulation in Chemical Engineering

Dynamic-Simulation-in-Chemical-Engineering

Dynamic simulation is an extension of steady-state process simulation whereby time-dependence is built into the models via derivative terms i.e. accumulation of mass and energy. The advent of dynamic simulation means that the time-dependent description and control of real processes in real or simulated time are possible. This includes the description of starting up and shutting down a plant, changes ... Read More »

ASTM / American Society for Testing and Materials

ASTM-American-Society-for-Testing-and-Materials

There are numerous American Society for Testing and Materials designations cover the specification of wrought materials, forgings and castings used for plate, fittings, pipe and valves.The ASTM standards are directed to dimensional standards, materials and strength considerations. Some of the more material standards referenced are: A 36 Specification for Structural Steel A 53 Specification for Pipe, Steel, Black and Hot ... Read More »

ASME B16 Piping Component Standards

ASME-B16-Piping-Component-Standards

Piping component standard developed by the American Society of Mechanical Engineers or the American National Standards Institute (ANSI) B16.1 Cast Iron Pipe Flanges and Flanged Fittings B16.3 Malleable Iron Threaded Fittings, Class 150 and 300 B16.4 Cast Iron Threaded Fittings, Classes 125 and 250 B16.5 Pipe Flanges and Flanged Fittings B16.9 Factory Made Wrought Steel Buttwelding Fittings B16.10 Face to ... Read More »

Test Pressure Detail from Codes

test-pressure-details-from-code

Code Test type Test pressure minimum Test pressure maximum Test pressure holding time Examination ASME B31.1 Hydrostatic(1) 1.5 time design Max allowable test pressure any component or 90 percent of yield 10 minutes Design pressure ASME B31.1 Pneumatic 1.2 times design 1.5 times design or max allowable test pressure any component 10 minutes Lower of 100 psig or design pressure ... Read More »

Piping Design Engineer Interview Questions Part-13

piping design engineer interview questions part 13

1. What is the ASME code followed for design of piping systems in process piping (refineries&chemical industries)? A) B31.1 B)B31.3 C)B31.5 D)B31.9 Ans: (B) 2. What do you mean by following items? A)ISLB-400 B)ISMB-600 C)ISHB-350 D)ISMC-300 E)ISJB-150 F)ISLB-200 G)ISMB-450 H)ISWB-400 I)ISJC-200 J)ISLC-350 K)ISMC-250 Ans: A – Indian STD lightweight beam, web size-400 B – Indian STD medium weight beam, web ... Read More »

Pipe Fittings and Valves

Pipe Fittings and Valves

The piping components consist of fittings, pipes and valves Pipe Fittings and Valves Piping system is an arrangement of components which facilitates the flow of fluid as per the process requirement. The piping components consist of fittings, pipes and valves. Piping design engineer shall have the in-depth knowledge of types of fittings (such as elbow, tee, reducer, flange etc.), Pipes ... Read More »

Role of Piping Engineer

Role of Piping Engineer

Piping engineers look after execution phase of the project or to be concise he takes charge on construction phase of the project. Assisting construction team in reading drawings, locating the exact point of installation, supply and monitoring inventory. Troubleshooting field raised issues and providing immediate solution to the execution team. Monitoring the entire execution phase to make sure that the ... Read More »

Questions Related to Plumbing

oilandgasclub.com plumbing

1.What is the discharge pipe that is flow condition and that extends from the lift station carrying sewage under pressure ? Force main 2 .Where will the drain from battery rooms battery rooms  before discharge to the sanitary sewer line ? Neutralization Tan 3.What is the minimum size of sewer lines that are allowed to be embedded  unde slab? 64mm ... Read More »

Isometric for Pump Discharge Line & Suction Line

isometrtic

Isometric for Pump discharge Line Isometric view for the below Pump suction line Top Courses in Engineering Design PDMS Training 3+ Live Projects 700+ Interview Questions 24/7 E-learning Access SP3D Training Certified Trainer 700+ Interview Questions Job Assistance PDS Training 40+ Mock test 20+ Sub Topic Job Assistance Intools Training 3+ Live Project 20+ Sub Topic Expert Mentors Tekla Training ... Read More »

How the Centrifugal Force Generated in the Centrifugal Pump?

centrifugal pump

Answer: – The process liquid enters the suction nozzle and then into the eye (center) of the revolving device known as an Impeller. When the impeller rotates, it spines the liquid sittings in the cavities between the vanes outward and provides centrifugal acceleration. As the liquid leaves the eye of the impeller alow – pressure area is created causing more liquid ... Read More »

Free WordPress Themes - Download High-quality Templates