Home / Blog / Questions Related to Plumbing

Questions Related to Plumbing

oilandgasclub.com plumbing

1.What is the discharge pipe that is flow condition and that extends from the lift station carrying sewage under pressure ?
Force main
2 .Where will the drain from battery rooms battery rooms  before discharge to the sanitary sewer line ?
Neutralization Tan
3.What is the minimum size of sewer lines that are allowed to be embedded  unde slab?
64mm or 2”Dia
4.What are provided in sanitary sewer  line for change in direction?
5.Liquids at a temperature of ______ deg F shall not be discharge into any drainage or public sewer ?
140 Deg .F.
6.Any branch of water distribution piping networks shall not be less than  ­­­______  nominal diameter ?
63 mm

7.What should be used for the connection of water distribution between dissimilar metals?
Dielectric or insulating union.
8.what  is the maximum separation distance between for public sewer?
90 meters (295ft)
9.The copper tubes used for water piping shall weigh not less than ___ type?
Type L
10.What is the minimum accepted trap seal clearance for building ?
4” (110mm)
11.What is the TOE wall & what is its minimum height?
A raised curb that controls and directs effluent to a catch basin and the toe walls shall have min height of 150mm
12.What is the minimum trench width required at the bottom?
300mm above the top of the pipe

About Oilandgasclub.com

About Oilandgasclub

Oilandgasclub.com is an international oil and gas (online & offline) conference technical training org from India. Oilandgasclub.com 3000+ professionals trained 150,000 hours of classes delivered 500+ expert trainers available and 3600+ respondents 30+ countries 80+ team. Blogs about technical tips at this blog. Contact or more about customized technical training from this page

70+ courses    7 venues    5 categories


[mc4wp_form id=”3810″]


Leave a Reply

Your email address will not be published.

Free WordPress Themes - Download High-quality Templates